FFA 6000

FFA dual power dual mono professional audio amplifiers

Ideally suited for driving very high output bass and sub bass loud speakers or high power full range systems. Designed to drive sustained, very high output audio into 2 Ohm loads. Featuring FFA proprietry Class D PWM amplifiers. These are partnered with FFA high current switch mode PSU technology. Massive bulk storage capacitance per channel ensures continuous high power deliver to the load. The FFA-6000 is dual mono - each channel is totally independent. FFA dual mono power amplifiers are mains supply power efficient and operate cool even in the most demanding environments. Mechanical construction is tour grade with aluminium used throughout the chassis design. This provides a robust and rigid but lightweight housing for the electronic systems.

Key Features

2 x 3000 Watts at 2 Ohms
FFA Class D PWM amplifiers
Power supply soft start
High thermal headroom
Weight - 12kg
Dual mono power amplifiers
Clip limiter
5 year factory warranty
Hand constructed and designed in England
Switch mode power supply
Power efficient
2 Ohm drive
All aluminium construction
Dual power supply

Technical Specification

Power Ratings: FFA - 6000 - 8 Ohms 1000W, 4 Ohms 1800W, 2 Ohms 3000W
Gain: 32 dB
THD: Typical 0.05 4 Ohm 1kHz THD+N
Frequency Response: 20Hz - 20kHz
Controls: Power on rocker switch each channel. 40 point Potentiometer each channel
Indicators: Power ‘on’ green LED each channel, Signal present green LED, -3dB drive yellow LED, amplifier clip - red signal LED, amplifier protect due to over temp/clip limiter activated and 3 second mute at power up = red LED
Cooling: Rear to front airflow, high CFM fan
Load Protection: DC on output, side chain TCA clip limiter circuit
Amplifier Protection: Short circuit, current overload, thermal, reactive load stability
Audio Inputs: Neutrik® female XLR with male XLR signal link through per channel
Audio Outputs: Pair of Neutrik® NL4MP-UC speakON® connectors per channel. Each connector has all output poles live 1+, 1-, 2+, 2-. This allows the use of 4 core loudspeaker cable to minimise conductor losses between amplifier and loudspeaker
Power Supply: 2 x 20A Neutrik® powerCON® required – one each channel
Power Requirement: 220-240 VAC 50-60Hz, 2x16A max per amplifier. 120V (configured at factory)
Dimensions: 2RU 19” rack mount enclosure, H88mm x W483mm x D510mm. Depth includes integral rear rack support ears
Weight: 12 kg